1.24:
  1. Update - (ITS:0121149) Change to Defaults for all future releases - EFI shell disabled by default but able to be enabled in the setup menu.

1.23:
  1. Update - (ITS:0121149) Change to Defaults for all future releases.
  2. Fix    - (ITS:0119838) DisplayPort to HDMI conversion prevents boot - set HDMI max rate to 2.97Gbps.
  3. Fix    - System assert in some chipset code base and error message shows "gBdsLibStringPackHandle != ((void *) 0)".

1.22:
  1. Update - (ITS:0110702) BIOS default settings.
              1. Thermal Configuration -> CPU Thermal Configuration -> Tcc Activation Offset = 8
              2. System Agent (SA) Configuration -> Display Setup Menu -> DDI PORT A HDMI_ADLPS = Native DP/HDMI Config

1.21:
  1. Add    - (ITS:0109295) Screenshot hotkey.
  2. Update - (ITS:0108639) "Console Serial Redirect" option only visible when Expert Mode is Enabled.

1.20:
  1. Add    - (ITS:0108638) EC-less Retimer Capsule Update.
  2. Add    - (ITS:0108383) Hide BIOS Options - base on "Emerald MP BIOS Specification.docx.pdf.
  3. Update - (ITS:0108639) Restore "Console Serial Redirect" option.

1.19:
  1. Fix    - (ITS:0108236) Change behavior to turn the screen on when waking from S3.
  2. Add    - (ITS:0108065) "Last" state after G3.
  3. Add    - (ITS:0108066) Making Pseudo G3 setting easier for users.
  4. Update - (ITS:0108236) Thunderbolt4 vPro passthrough - Change CSME settings,  MAC Pass Through.

1.18:
  1. Fix    - (ITS:0107927) COM3 does not initialize.
  2. Fix    - (ITS:0107990) PCIe Bus Numbers for PCH PCIe Ports Change.
  3. Update - (ITS:0107078) Default setting changes.
  4. Update - (ITS:0108067) Set "Intel(R) ME CLINK Signal Enabled" to Yes which is its default value to avoid one more reboot after RTC is cleared.

1.17:
  1. Update - (ITS:0107078) Default setting changes.

1.16:
  1. Update - (ITS:0106531) Update NPHY to latest version.
  2. Update - (ITS:0106639) Update all the BIOS components to MR1 BKC.
  
     Reference Code           Version
        AlderLakeSiliconPkg    RC 3404.00
     AC Module                Version
     [AlderLake PS]
        Boot Guard             1.18.10
        BIOS Guard             2.0.5021
        TXT                    1.18.09
     UEFI Driver              Version
        GOP                    21.0.1054
        VMD                    19.3.0.1016.1
        LAN                    26.2
     Microcode                Version  Stepping
	    m_80_906a2             0315    	K-0
		m_80_906a3             0424     L-0

1.15:
  1. Add    - (ITS:0105273) Add WoL Enable/Disable Switch.
  2. Update - (ITS:0105323) ACPRESENT Configuration.          
	          1) Revert GPD1 to native function (ACPRESENT).
	          2) Change LAN_DISABLE_N from GPD1 to GPD9.
	          3) Adjust Platform vPro 2.5G Wired LAN SMBUS slave address to 0x59.
	      
  3. Update - (ITS:0099449) SATA Amplitude Adjustment.
              SATA0:
                Gen1 = 45 = 101101b
                Gen2 = 48 = 110000b
				
              SATA1:
                Gen1 = 45 = 101101b
                Gen2 = 52 = 110100b

1.14:
  1. Add    - (ITS:0104138) Pseudo-G3 BIOS option.
  2. Update - (ITS:0104135) VCCIN AUX IMON Enable.

1.13:
  1. Update - (ITS:0103414) ME Firmware included is Consumer but should be Corporate.

1.12:
  1. Fix    - (ITS:0101454) Wake on Lan failed under S3.

1.11:
  1. Add    - (ITS:0102728) Support for primary/secondary power policy.

1.10:
  1. Update - (ITS:0100228) Delay PLTRST# Power-on timing for 50ms.

1.09:
  1. Update - (ITS:0101454) Configure PCH GPD2/ LANWAKE to LANWAKE.
  2. Update - Set splash screen to provide OnLogic Image.
  3. Update - Set timeout to 3 seconds and enable USB Hot Key.
  4. Update - Modify _UPC and _PLD methods of the ASL code about USB ports.
  5. Update - Set BIOS release version and date of SMBIOS as updatable by H2OSDE.

1.08:
  1. Add    - (ITS:0099685) MODE Control Implementation for COM2~COM4.
  2. Add    - Add setup options to control COM1 mode.
  3. Update - Disable RMT.
  4. Update - Set UART0 as Communication port. 

1.07:
  1. Fix    - (ITS:0099570) COM Add-In Ports are not detected in Windows.
  2. Update - (ITS:0099449) SATA Amplitude Adjutment.
  3. Update - Enable 128 FIFO of SIO UART1 ~ UART4.
  4. Update - Enable HD Audio. 
  5. Update - Disable Audio DSP, HDA Link, and SNDW#1.

1.06:
  1. Update - (ITS:0099449) SATA Amplitude Adjutment.
  2. Update - Disable unused I2C3 ~ 5.
  3. Update - Disable GNA, DTT, Control logic, Timed GPIO, and HD Audio. 

1.05-RELEASE/DEBUG:
  1. Add    - (ITS:0099302) Expose INT3515 device to Windows device manager.

1.04-RELEASE/DEBUG:
  1. Fix    - (ITS:0099191) Disable D3Cold on ASM3142.
  2. Fix    - (ITS:0099236) PWRBTN# Failed under S0.
  3. Fix    - (ITS:0099238) SLP_S3# Keeps High after entered Sleep by Win10.
  4. Add    - (ITS:0099227) Retimer compliance mode BIOS option.
  5. Add    - (ITS:0099229) LAN Enable Option in BIOS.
  6. Update - Enable UART0.
  7. Update - Enable DDI port 1 and 2 HPD.
  8. Update - Disable unused PS2 keyboard and mouse.
  9. Update - Switch setup utility to text mode.

1.03-RELEASE/DEBUG:
  1. Fix - (ITS:0099098) PCIE Clock 1 & 5 abnormally OFF during boot.

1.02/1.02-RMT:
  1. Fix    - (ITS:0099073) Modify GPP_D14 to be 3.3Volt.
  2. Fix    - (ITS:0099074) Disable Intel integrated LAN and the GbE PCIe Port select on Port7.
  3. Debug  - (ITS 0099089) Memory initialization has failed on SODIMM1
              Modify the SPD address of SODIMM1 to 0xA4, and clear the unused SPD address table.
  4. Update - Enable RMT. If you don't need it, please refer ITS 0099058 to disable it by H2OEZE.

1.01-DEBUG:
  1. Power on BIOS is based on ADL RVP Branch 05.44.23.0047.1, Revision (165)
  
    Module                 Version
	  SIC                    0C.E0.69.74
	  FSP                    0C.01.69.74
	  MRC                    0.0.4.6
	  Microcode              m_80_906a3_00000422

    UEFI Driver            Version
	  GOP                    21.0.1046
	  LAN  	                 0.10.01
  
  2. BIOS is EFI_DEBUG version and it will output debug messages from SIO UARTA (0x3F8).
  3. GPIO settings is based on "Emerald GPIO Table EVT.xlsx".
  4. Implement hotkey "DEL" and "F10".