1.39: 1. Update - (ITS:0131276) SIO Menu presence - to support different revisions of SIO. 1.38: 1. Update - (ITS:0125513) Onyx Secure Boot UEFI - add "Enroll Keys Only" option to "Secure Boot". 1.37: 1. Update - (ITS:0125513) Onyx Secure Boot UEFI. (1) Hide "Secure Boot Administration" menu on Front page. (2) Enable Secure Flash. (3) Hide "Secure Boot" option on Boot page. 1.36: 1. Update - (ITS:0120674) VccIn Aux Icc Max setting for optimizing the CPU performance. 1.35: 1. Update - (ITS:0120511) SMBIOS/DMI BIOS release date read-only. 1.34: 1. Update - (ITS:0120485) BIOS menu changes for MP. (1) Setup Utility > Advanced > PCH-IO configuration > State After G3 = "S5 State". (2) Setup Utility > Boot > Network Stack = "Enabled". 1.33: 1. Fix - (ITS:0120151) WoL from S5 is not working in certain conditions. 2. Fix - (ITS:0120184) Display doesn't automatically turn on after wake from S3 by WoL (in Windows 11). 3. Add - (ITS:0120146) Intel virtualization technology option. 4. Add - (ITS:0120144) I226 Wake-on-LAN enable. 5. Add - (ITS:0120161) Secure boot defaults to enable. 6. Update - (ITS:0120147) Default boot order in BIOS setup. 1.32: 1. Update - (ITS:0119951) Change default splash screen to OnLogic Logo and remove POST code on screen. 1.31: 1. Update - (ITS:0119500) BIOS menu update for PVT. 1.30: 1. Update - (ITS:0119684) [Onyx] Transition FW components to MR3 - Update code base to Intel_AlderLake-N_RVPs_Rev5.4/Tag/05.45.49.0006. Reference Code/Binary Version: NESG SIC version 1.3.0 (MR3) (Updated) CSE FW version 16.50.10.1351v7 (Updated) ISH FW version 5.4.2.4591 IPU FW version 0.10.1.7051 ChipInit version A0V2 GOP (X64) version 21.0.1063 Microcode version m_11_b06e0_00000015 (Updated) BootGuard ACM version 1.18.12 BiosGuard Module version 2.0.5021 SEG feature package version: SegFeaturePkg version 02.01.04.0010 InsydeCrPkg version 01.02.04.0023 (Updated) InsydeH2oUvePkg version 01.01.04.0010 InsydeAdvBootPkg version 01.01.06.0044 (Updated) InsydePlatformInfoPkg version 01.01.06.0019 InsydeEventLogPkg version 02.02.04.0017 InsydePostCodePkg version 01.02.04.0009 (Updated) SioMec152xPkg version 00.00.02.0039 (Updated) SioIt8659ePkg version 00.00.02.0039 (Updated) 2. Fix - When a non-USB device is plugged into the M2B, there is a yellow bang on the USB device that does not actually exist. 1.29: 1. Fix - (ITS:0119394) Fails to list PXE boot options. 1.28: 1. Update - (ITS:0114905) Error LED: No Panel Installed timing adjustment: adjust the prevent boot timing to be later than the BIOS logo pop out. 2. Update - (ITS:0117131) Use BIOS native password mechanism for intrusion fault recovery. 1.27: 1. Fix - (ITS:0116763) Failed to Enter S3 by PWR Button at the second time resumed from S3. 1.26: 1. Update - (ITS:0116722) Change VCCIN_AUX Imon Slope for DVT2. 1.25: 1. Add - (ITS:0113856) Intrusion detection function implementation. 2. Update - (ITS:0114905) Error LED: No Panel Installed timing adjustment. 3. Update - (ITS:0116474) BIOS menu update for DVT2. 1.24: 1. Update - (ITS:0114594) Transition to MR2 BKC - Update code base to Intel_AlderLake-N_RVPs_Rev5.4/Tag/05.45.38.0005. Reference Code/Binary Version: NESG SIC version 1.2.0 (MR2) (Updated) CSE FW version 16.50.10.1351v4 (Updated) ISH FW version 5.4.2.4591 (Updated) IPU FW version 0.10.1.7051 ChipInit version A0V2 GOP (X64) version 21.0.1063 Microcode version m_11_b06e0_00000012 (Updated) BootGuard ACM version 1.18.12 BiosGuard Module version 2.0.5021 SEG feature package version: SegFeaturePkg version 02.01.04.0010 (Updated) InsydeCrPkg version 01.02.04.0022 (Updated) InsydeH2oUvePkg version 01.01.04.0010 InsydeAdvBootPkg version 01.01.06.0043 (Updated) InsydePlatformInfoPkg version 01.01.06.0019 (Updated) InsydeEventLogPkg version 02.02.04.0017 (Updated) InsydePostCodePkg version 01.02.04.0007 (Updated) 2. Update - (ITS:0114124) GPIO Table Update for DVT2, remove ISH function, and implement KEYB_MUX_SEL function. 1.23: 1. Fix - (ITS:0114228) H2OSDE Freezes system. 1.22: 1. Update - (ITS:0112477) Intel SST DMIC_1A configuration - replace NhltConf0DmicX1_38_4.bin with nhlt.bin. 2. Update - (ITS:0112692) Additional COM Port check - change Serial IO UART0 to COM3. 3. Update - (ITS:0112690) Boot Priority - change Shell boot priority to the last. 1.21: 1. Update - (ITS:0112477) Intel SST DMIC_1A configuration. 2. Update - (ITS:0112488) Verb-Table roll back to "HDACfg-0888-1E030012 add DMIC 20230511.txt". 3. Remove - (ITS:0109298) Proximity Sensor wake up Onyx system from S3 - remove the unused ASL. 1.20: 1. Update - (ITS:0112063) Onyx DVT GPIO Table Update - based on "Onyx GPIO Table DVT .xlsx". 2. Update - (ITS:0112071) The Onyx Board into S5 <-- --> DS5 power cycling - set Disable DSX ACPRESENT pulldown to Enabled as default. 3. Update - (ITS:0111606) BIOS Boot delay about 60s-70s after remove RTC Battery - disable SA GV. 4. Add - (ITS:0109298) Proximity Sensor wake up Onyx system from S3 - enable ISH, add ISH FW and temporary PDT into CSME. 1.19: 1. Fix - (ITS:0111063) Some Onyx mother board will auto-reboot after using power button to force system shut-down. 1.18: 1. Add - (ITS:0110127) The function for power on error led - set SIO VIN0 to be monitoring P12VA. 1.17: 1. Update - (ITS:0110876) Update code base to Intel_AlderLake-N_RVPs_Rev5.4/Tag/05.45.24.0004. Reference Code/Binary Version: NESG SIC version 1.1.0 (MR1) (Updated) CSE FW version 16.50.5.1303v3 (Updated) ISH FW version 5.4.2.4590 (Updated) IPU FW version 0.10.1.7051 ChipInit version A0V2 GOP (X64) version 21.0.1063 (Updated) Microcode version m_01_b06e0_00000010 (Updated) BootGuard ACM version 1.18.12 BiosGuard Module version 2.0.5021 SEG feature package version: InsydeCrPkg version 01.02.04.0019 (Updated) InsydeH2oUvePkg version 01.01.04.0010 InsydeAdvBootPkg version 01.01.06.0042 (Updated) InsydePlatformInfoPkg version 01.01.06.0017 (Updated) InsydeEventLogPkg version 02.02.04.0017 (Updated) InsydePostCodePkg version 01.02.04.0002 (Updated) The following versions of the H2O tool were used for verification: - H2OFFT version 200.02.00.07 (Updated) - H2OSDE version 200.02.00.06 (Windows), 200.02.00.07 (EFI Shell) - H2ORTE version 200.02.00.02 - H2OUVE version 200.02.00.09 2. Update - (ITS:0110127) The function for power on error led - the led will not work when system power off. 1.16: 1. Add - (ITS:0110127) The function for power on error led. 1.15: 1. Add - (ITS:0110587) The device manager can not find COM port for MCU. 1.14: 1. Update - (ITS:0110319) Got Different Verb-table setting when installed OS. Set HD Audio Bus Controller Subsystem Id to 0x00121E03. 2. Update - (ITS:0109842) System BSOD when installed MODBAY USB3 card on Onyx. Disable PCIe function swap. 1.13: 1. Fix - (ITS:0109842) System BSOD when installed MODBAY USB3 card on Onyx. 1.12: 1. Update - (ITS:0106342) Update verb-table based on "HDACfg-0888S-VD2 1E030012 20230518.txt". 2. Update - (ITS:0109833) M2B_W_DISABLE1_N (GGP_F5) settings based on the B-KEY Config Pins: Change voltage of the GPP_F5 from 1.8 to 3.3V. 1.11: 1. Add - (ITS:0109833) M2B_W_DISABLE1_N (GPP_F5) settings based on the B-KEY Config Pins. 1.10: 1. Update - (ITS:0109814) Verb-Table 20230511 Update. 1.09: 1. Add - (ITS:0109298) Add the ASL code of the sensor based on "VCNL4200.ASL". 2. Update - (ITS:0109488) SATA Amplitude Adjustment. 1.08: 1. Update - (ITS:0109488) SATA Amplitude Adjustment. 1.07: 1. Add - (ITS:0109298) Proximity Sensor wake up Onyx system from S3 - set CPU_I2C0_INT (GPIO_VER2_LP_GPP_H7) to generate SCI. 2. Add - Add I225 LAN Controller Enable Option in setup utility. 3. Update - Expose the Console Redirection option, and set it to disable as default. 1.06: 1. Add - (ITS:0109307) Pseudo G3 for Onyx. 2. Update - (ITS:0109268) DP++ support on Display Port 0. 3. Update - Fix UEFI version value in setup utility main page. 1.05: 1. Fix - (ITS:0108720) Disable the external V1P05/VNN rails. 2. Fix - (ITS:0108816) The device manager does not display COM - COM2 will fail to send/receive messages. 3. Fix - (ITS:0109160) COM2 is not working under OS. 4. Update - Set SelectedRvp to ADL-N DDR5 TR3 (ADL-N + ADP-P). 5. Update - Disable unused device: (1) IPU (2) SPI1 controller. (3) MIPI Camera Contorl Logic 1 & 2. (4) I2C1 ~ I2C5 controller. 1.04: 1. Fix - (ITS:0108816) The device manager does not display COM. 2. Fix - (ITS:0109094) Type-A USB3 Ports are not working. 3. Update - (ITS:0108720) Set SelectedRvp to ADL-P DDR5 (ADL-P + ADP-P) in mFIT. 1.03: 1. Update - (ITS:0108720) Update code base to Intel_AlderLake-N_RVPs_Rev5.4/Tag/05.45.07.0003. Reference Code/Binary Version: NESG SIC version 1.0.0 (PV) (Updated) CSE FW version 16.50.0.1232v3 (Updated) ISH FW version 5.4.2.4582v3 IPU FW version 0.10.1.7051 ChipInit version A0V2 GOP (X64) version 21.0.1056 Microcode (A0) version m_01_b06e0_0000000f (Updated) BootGuard ACM version 1.18.12 BiosGuard Module version 2.0.5021 2. Update - In mFIT: 1. Set TcssPortEnMask to 0x3. 2. Set TypecPort1ConTypeSel to Type C. 3. Set TypecPort2ConTypeSel to Type C. 4. Set RpmcSupported to NO. 5. Set RpmcRebindEn to NO. 3. Update - Disable Console Redirection temporarily for power on. 4. Update - (ITS:0108620) No VCCANA Power, VCCANA power is always low - set VCCANA VR Location to VCCANA is CPU FIVR. 5. Fix - (ITS:0108720) Can not get debug information from COM1. 1.02: 1. Update - (ITS:0106342) Adjust DDI configuration and VBT based on "ONYX_EVT_MB.pdf". DDIA - eDP DDIB - DP 1.01: 1. Power on BIOS based on Chipset Tag 05.44.50.0002: Reference Code/Binary Version: NESG SIC version 0.7.0 (Beta) CSE FW version 16.50.0.1146 IPU FW version 0.10.1.7051 ChipInit version A0V2 GOP (X64) version 21.0.1056 Microcode (A0) version m_01_b06e0_0000000e BootGuard ACM version 1.18.12 BiosGuard Module version 2.0.5021 2. BIOS is EFI_DEBUG version and will output debug message from SIO COM1. 3. GPIO settings is based on "Onyx GPIO Table EVT .xlsx". 4. Implement hotkey "DEL" and "F10".