vendor_id=0x0403 # Vendor ID product_id=0x6015 # Product ID max_power=0 # Max. power consumption: value * 2 mA. Use 0 if self_powered = true. ########### # Strings # ########### #manufacturer="ACME Inc" # Manufacturer #product="USB Serial Converter" # Product #serial="08-15" # Serial ########### # Options # ########### self_powered=true # Turn this off for bus powered remote_wakeup=false # Turn this on for remote wakeup feature use_serial=true # Use the serial number string # Normally out don't have to change one of these flags in_is_isochronous=false # In Endpoint is Isochronous out_is_isochronous=false # Out Endpoint is Isochronous suspend_pull_downs=false # Enable suspend pull downs for lower power change_usb_version=false # Change USB Version usb_version=0x0200 # Only used when change_usb_version is enabled # Only used on FT-R chips (when omitted, use chip defaults) # Possible values correspond to enum ftdi_cbus_func. #cbus0=TXLED #cbus1=RXLED #cbus2=TXDEN #cbus3=PWREN #cbus4=SLEEP # Only used on FT232H chips (when omitted, use chip defaults) # Possible values correspond to enum ftdi_cbush_func. #cbush0=TRISTATE #cbush1=TRISTATE #cbush2=TRISTATE #cbush3=TRISTATE #cbush4=TRISTATE #cbush5=TRISTATE #cbush6=TRISTATE #cbush7=TRISTATE #cbush8=TRISTATE #cbush9=TRISTATE # Only used on FT230X chips (when omitted, use chip defaults) # Possible values correspond to enum ftdi_cbusx_func. cbusx0=TRISTATE cbusx1=DRIVE_0 cbusx2=DRIVE_0 cbusx3=DRIVE1 ######## # Misc # ######## filename="eeprom.new" # Filename, leave empty to skip file writing